Preventative walk-in refrigerator troubleshooting has become a common practice among many refrigerator owners. Unfortunately, not all individuals have sufficient information on the techniques to maintain their systems and prevent serious issues affecting their refrigerator systems. If you want to keep your refrigerator in the best shape, a unique walk-in refrigerator maintenance checklist is attached.
1. Check Drain Lines
In your refrigerator, the drain lines are tasked with getting rid of water that has been used to cool down the evaporator coils. Because of this, it is highly likely for these lines to get clogged up with all sorts of debris over time. Fortunately, you can clean your drain lines using a simple mixture of bleach and water. Just make sure that you do not use too much bleach as it might damage the lines.
2. Check Condenser Coils
The condenser coils of your refrigerator are responsible for getting rid of heat. That is why they need to be kept clean at all times. If they are not, the heat will build up and cause the fridge to work harder than usual. As a result, your electricity bill will go up, and the lifespan of your fridge will be shortened. To clean the coils, remove them and use a brush to eliminate any dirt or debris accumulated on them.
3. Check the Doors
The doors of your refrigerator need to be checked regularly as well. Make sure that they are adequately sealed and that there are no gaps. These gaps can let in warm air, which can cause the fridge to work harder and use up more energy. In addition, check the hinges to see if they need to be lubricated. This will help keep the doors from making too much noise when you open or close them.
4. Check the Temperature
It is essential to check the temperature of your fridge regularly. This will help you determine if it is set at the correct level. The ideal temperature for a fridge is between 35- and 40-degrees Fahrenheit. If set any higher than that, the fridge will have to work harder to keep the food inside cold. You need to know that the fridge is set at the correct temperature so that you can avoid wasting energy.
5. Check the Gaskets
The gaskets are responsible for sealing the door of the fridge. Unfortunately, over time, these gaskets can become cracked or damaged. When this happens, warm air can enter the fridge, causing it to work harder. To prevent this from happening, you need to check the gaskets regularly and replace them if they are damaged. Therefore, analyzing your gasket is crucial for maintaining your fridge in good condition. Also, checking the gaskets will help you know if your fridge door is sealed correctly.
Conclusion
Conducting regular maintenance on your walk-in refrigerator is the key to keeping it in good condition. By following the tips on this checklist, you can ensure that your fridge will last for a long time. Reach out to Commercial Refrigeration Service to get more tips on maintaining your walk-in refrigerator.